CEL Power8 workshop Manual de usuario descargar pdf (Pagina 43)

8. Halogen Light

Jigsaw - Maintenance

7.4

Changing the blade

WARNING. Always ensure that the saw is

switched off and the POWERhandle is detached

from the tool before making any adjustments.

1. To fit the blade, loosen the 2 hexagonal

screws on the blade clamping block.

2. Slide the blade into the locating groove with

the teeth pointing forward.

3. Tighten the hexagonal screws with the

included hexagonal key.

WARNING. The teeth of the jigsaw blade

should be pointing forward away from the user.

IMPORTANT. After replacing the saw blade,

make sure that the hexagonal screws are firmly

tightened and the blade is running freely.

Re-attach the POWERhandle and run the saw

under no load to check that it runs smoothly

before using it to cut any material.

General Inspection

Regularly check that all the fixing screws are

tight. They may vibrate loose over time.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 85 86

Sin comentarios

CEL Power8 workshop Manual de usuario Pagina 43