search

CEL Power8 workshop Manual de usuario Pagina 83

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 86
  • Tabla de contenidos
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 82
Trouble Shooting
1515
Table Saw
Drill Press
Won’t switch on.
Difficult to install
parallel fence.
Difficult to remove
the fence.
Won’t switch on.
Check that the table saw shield is correctly assembled
to the bottom of the circular saw before assembling it
into the case.
Ensure that the internal power coupling is correctly
assembled onto the circular saw.
Ensure there is a CHARGED POWERhandle in the
charger dock.
Check that the green hook is fully under the ledge of the
lid before lowering the locking end of the post to the
work surface.
Check that the post is being assembled parallel with the
front or rear edge of the case; use the ruled scale to
check.
Before lowering the locking part of the post to the work
surface ensure the moving hook is open and can easily
move under the ledge on the charger dock.
To release the fence, Ensure that the sliding part of the
post is up and away from the case, then rotate the post
up around the green hook on the other end.
Ensure that the circular saw or jigsaw is not assembled
to the underside of the case lid.
Check that the drill head is fully assembled into the post
and the green locking latch is forward.
Ensure the post is assembled below the first locking
position.
Check that the case lid and both latches are fully closed.
10.3.1-4
10.3.7
10.3.8
10.3
10.3.9
10.3.9
10.3.9
10.3.9
11.4
11.4
11.4
Trouble Shooting
1515
Scroll Saw
POWERhandle
Post won’t slide
up or down.
Post is not locked
in position.
Won’t switch on.
Will not charge in
the dock.
Check that the case lid and both latches are fully closed.
Ensure there is a CHARGED POWERhandle in the
charger dock.
The green lever at the back of the case must be up for
the post to move.
Ensure that the green lock lever is completely down and
the locking pins on the case are lined up with the
mating holes on the post.
Ensure that the jigsaw is correctly assembled onto the
underside of the case lid.
Ensure that the internal power coupling is correctly
assembled onto the jigsaw.
Ensure there is a CHARGED POWERhandle in the
charger dock.
Check that the main power is connected and turned on.
Check that the SCP (Secondary Charger Position) is
correctly packed into the pocket.
Check that the POWERhandle is fully inserted into the
dock
Check the fuse on the plug (mains plug fuses are not
fitted in all countries)
Check that the case lid and both latches are fully closed.
11.4
11.3.2
11.3.2
12.3
12.3
12.3.5
12.3
4.4
4.4
4.3
Vista de pagina 82
1 2 ... 78 79 80 81 82 83 84 85 86

Comentarios a estos manuales

Sin comentarios
  • Lance-Larkin Bosslan Ouellet Rola CFI
  • Life Fitness Gimnasio, Gimnasia Y Entrenamiento Con Pesas Philips Cuidado De Mascotas Onwa Máquina de reducción de ruido Black & Decker Accesorios De Cocina Y Artículos Para El Hogar Gigabyte Software de gestión de sistemas
  • Casio PX-360 Adlink Express-BASE6 Acer X123PH LG 29LN460R Electrolux EHH6340FOK
  • IKEA MW V00 S Instrucciones de uso Rosewill RPLC-500 Manual de usuario Blaupunkt DX-R52 Manual de usuario Dell Printer 922 Manual de usuario Philips AC4012/10 Manual de usuario